
Westchase Cabinet Refacing
Cabinet Refacing in Westchase, FL
Cabinet refacing in Westchase, FL. Box resurfacing, new doors and drawer fronts, hardware upgrades, free written estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Westchase and nearby communities.
Cabinet refacing keeps your existing cabinet boxes in place and replaces what shows: doors, drawer fronts, exposed panels, and hardware. The boxes get resurfaced with matching veneer or laminate so the whole kitchen reads as one finish, not a patch job.
Westchase Cabinet Refacing scopes every job around what's actually behind the old doors. Most boxes in this area are structurally sound, built solid enough that tearing them out and replacing cabinets outright wastes money. Refacing solves the dated look without that demo.
What's included
What's Included with Cabinet Refacing
Typically included
- Box resurfacing with wood veneer or laminate to match new door finish
- New doors and drawer fronts sized to your existing openings
- Matching end panels on exposed cabinet sides
- Hardware install — hinges, pulls, knobs
Optional
- Soft-close hinge upgrade on all doors
- Crown molding added to cabinet tops
- Interior drawer organizers
Customer prep
- Clear counters and cabinet contents before the crew arrives
- Confirm finish and hardware selections ahead of the install date
Want a clearer scope?
Get a Free EstimateHow it works
How Our Cabinet Refacing Process Works
Step 1Cabinet Assessment
Existing cabinet boxes are inspected for structural soundness before refacing begins.
Step 2Design Consultation
Clients review finish and style samples to plan the new cabinet appearance.
Step 3Box Preparation
Surfaces are cleaned and lightly sanded to help new materials adhere properly.
Step 4Veneer Application
Matching veneer is applied to exposed cabinet surfaces for a smooth finish.
Step 5New Door Fitting
Replacement doors and drawer fronts are installed to complete the updated look.
Step 6Quality Check
Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.
Materials
Materials and Methods for Cabinet Refacing
Westchase homes built from the 1990s through the 2000s hold up well structurally, but the original finishes don't always survive Florida's humidity and AC cycling. These are the materials we rely on to fix that for good.

Rigid Thermofoil
A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance that resists the edge-lifting older vinyl finishes suffer in humid kitchens.

Wood Veneer
Natural wood veneer offers an authentic grain look over existing cabinet boxes, a popular swap for the honey-oak look common in this build era.

Adhesive Bonding Agents
Professional-grade adhesives ensure veneer and laminate stay securely bonded long-term, even with daily temperature swings from AC cycling.

Matching Drawer Fronts
New fronts are crafted to match replacement doors for a unified design across the whole kitchen.

Edge Banding
Edge banding finishes exposed panel edges for a clean, professional look that holds up to moisture.

Cabinet Hardware Sets
Coordinated hardware sets complete the refaced cabinetry with a polished finish homeowners expect in this market.
Questions on materials?
Get a Free EstimateCost
What Does a Cabinet Refacing Cost in Westchase?
Cost depends on door count, material grade, and how much box resurfacing the job needs. Here's a rough breakdown to budget against. These are ballpark ranges, not a fixed quote. Contact us for a free written estimate based on your actual door count.
| Project type | Typical range | What’s included |
|---|---|---|
| Door/drawer-front swap only | $2,500–$5,500 | replacement doors and hardware on existing boxes. |
| Standard kitchen refacing | $6,000–$12,000 | full box resurfacing plus new doors and drawer fronts. |
| Kitchen plus island refacing | $9,000–$15,000 | full kitchen scope with matching island panels. |
| Premium wood veneer upgrade | $13,000–$20,000 | solid wood doors and higher-grade veneer throughout. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Cabinet Refacing
Always confirm with Hillsborough County before scheduling if your project touches plumbing or electrical.
| Typically needs a permit | Often no permit |
|---|---|
| Moving plumbing lines tied to a sink base cabinet | Door and drawer front replacement |
| Relocating electrical outlets as part of a layout change | Box resurfacing with veneer or laminate |
| Changing the cabinet footprint or wall layout | Hardware swaps and soft-close upgrades |
| — | Crown molding addition |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Cabinet Refacing
| DIY | Hire a pro |
|---|---|
| Fine for refinishing a single accent cabinet | Needed for full-kitchen color and finish consistency across every door |
| Workable for swapping hardware on a few doors | Required for hinge boring and alignment across a full cabinet set |
| Reasonable for small touch-up paint jobs | Worth it for moisture-sealed finishes that actually hold up in Florida humidity |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and After Cabinet Refacing

Before 
After
FAQs
Cabinet Refacing FAQs
What's the difference between refacing and refinishing?
Refacing replaces the doors, drawer fronts, and exposed surfaces while keeping the boxes. Refinishing strips and repaints or restains what's already there without new doors. Refacing gives you a different door style; refinishing updates color only.
Can you change cabinet layout during a refacing job?
Minor changes, like converting a cabinet to a pull-out drawer, are usually fine. Moving plumbing or walls to change the full layout pushes the job into remodel territory and may need a permit.
Will refacing match my existing cabinet boxes if they're an odd color?
Usually, yes. We match veneer and laminate tones to your box color, or we can resurface the boxes entirely so the old color doesn't matter. Custom color matching is also available through our [Custom Cabinet Doors](/services/custom-cabinet-doors) service.
How long does cabinet refacing take?
Most kitchens run one to three weeks from signed estimate to finished install, depending on door fabrication lead time.
Is cabinet refacing worth it compared to full replacement?
For boxes in good structural shape, yes. You get a new look at a lower cost and without the demo mess of a full teardown.
Next step
Get a Cabinet Refacing Estimate in Westchase
Call (727) 939-5435 or request a free estimate through our contact form. We'll look at your cabinets and give you real numbers, not a guess.
More services
Other Cabinet Refacing services

Kitchen Cabinet Refacing
Kitchen cabinet refacing near me in Westchase, FL. Full kitchen box resurfacing, new doors, hardware. Free estimates.

Bathroom Vanity Refacing
Bathroom vanity refacing in Westchase, FL with moisture-resistant doors, sealed finishes, and hardware upgrades. Free estimates.

Cabinet Door Replacement
Cabinet door replacement in Westchase, FL updates doors and drawer fronts without box resurfacing. Shaker, raised panel, flat panel. Free estimates.
Ask about Cabinet Refacing
Tell us about the project and how to reach you.